support1 support1
Home  //  BrainSoft  //  Services

Services

Submit / View a Ticket
 
Nokia E-Series

BrainTEL now works on All Nokia E-Series Phones 

 

Nokia N95 Phones

If you can browse the web on your e-seriese nokia phone with wifi and voip features then follow this procedure to enable brain tel as 2nd line:

Tools > setting > connections > sip settings >

profile name: braintel
service profile: IETF
default access point: your wifi name
public user name: sip:210xxxx@Server Name
use compression: no
registration: always on
use security: no

Proxy server:

Proxy server address:

sip: Server Name
realm: brain.net.pk
username: 210xxxx
password: ****
allow loose routing: yes
transport type: udp
port: 8891

Registrar server:

sip: Server Name
realm: brain.net.pk
username: 210xxxx
password: ****
transport type: udp
port: 8891

Tools > setting > connections > Interner tel.setings >

Options: New Profile
Name : Default
SIP Profiles: braintel

Where 210xxxx is your Brain Tel Number and "****" is your phone PIN assigned by Brain TEL.

 

Now dial your desired number without city code 5414444 (for Lahore) or with city code 021-111222888 (for other cities) or with 0300xxx-xxxx (for mobiles) and press the option key and select “Internet Call”.

For further details, you may contact This email address is being protected from spambots. You need JavaScript enabled to view it. ; or This email address is being protected from spambots. You need JavaScript enabled to view it. .

 
Linksys PAP-2-NA

STEP 1:
You must first determine what IP address is assigned to your device. To do this, you need to pick up the phone attached to the Line 1 jack and dial:
**** (in other words press, star key four times)
then dial: 110 #

and you will be told the IP Address of your device (e.g. 192.168.0.100)

STEP 2:

Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS>/
(where <IP ADDRESS>will be replaced by the address that would be given to you in STEP 1.

STEP 3:
You need to modify only a few parameters from the factory default. Do your settings as shown below.

Note: Please save every page separately when you will do any change to update your device for BrainTEL..

links-line1

Click on Save Settings after changes.

links-sip

Click on Save Settings after changes.

links-syst
STEP 6:

Make calls!

you are now ready to make and receive calls, your phone number is +92-42-210xxxx, it can be dialed from anywhere in the world, from ptcl Lahore line, you will have to dial only 210xxxx.

 
Handy Tone 486

Configuring HandyTone-486 WAN IP through Voice Prompt
Step 01:
HandyTone-486 stores a voice prompt menu (Interactive Voice Response or IVR) for quick browsing and simple configuration. To enter the voice prompt menu, pick up the phone and dial “***”.
Step 02:
Press 01 (To Select The Mode)
Choose “DHCP Mode”, or “Static IP Mode” by enter ‘9’ to toggle the selection. If you select “Dynamic IP Mode”, the device will retrieve all IP address information from DHCP server automatically when you reboots the device. Recommended Mode is “Dynamic IP Mode”.
Step 03:
Press 99 (To Reset The Device)
Enter “9” to reboot the device
Note: For Dynamic IP Mode there must be DHCP server running in your network.

Step 04:
For “Static IP Mode” please follow the following instructions:
If you selects “Static IP Mode” in step 2, you need to configure all IP address information through step 05 to 08.
Step 05:
Press 02 (IP Address)
The current WAN IP address is announced, Enter 12-digit for new IP address if in Static IP Mode.
Step 06:
Press 03 (Subnet Mask)
The current Subnet Mask is announced, Enter 12-digit for new Subnet address if in Static IP Mode.
Step 07:
Press 04 (Gateway Address)
The current Gateway address is announced, Enter 12-digit for new Gateway address if in Static IP Mode.
Step 08:
Press 05 (DNS Server)
Enter 12-digit for DNS Server address, Brain TEL DNS Server address is 203.128.003.018.
Note: Now restart your device as explained in step 03.

Example For “Dynamic IP Mode”

  • Pick the phone which is attach with the device
  • Press *** + 01 (if device is in static mode, press 9 to change its mode)
  • Press 99 + 9 to restart the device

Step 09:
Press *****to check ip and enter this IP in Internet Explorer’s URL Bar.
Note: If IP is 203.128.007.090 then you will enter 203.128.7.90 so please be careful.

Step 10:
Now login window will be there, enter password “admin”
And do your settings in Super Options Tab as follows:

SIP Settings:

sup-sip

click on SaveSet

Audio Settings:

sup-aud

Now click on SaveSet then Reboot.

STEP 11:

Make calls!

you are now ready to make and receive calls, your phone number is +92-42-210xxxx, it can be dialed from anywhere in the world, from ptcl Lahore line, you will have to dial only 210xxxx.

 
Sipura 3000

NOTE: We have seen instances where installing the SPA-3000 behind a firewall which blocks ICMP packets causes problems with registration. Try turning off any ICMP blocking on your firewall.

STEP 1:
You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and dial:
**** (four asterisks)
then dial: 110 #

and you will be told the IP address of your device (e.g. 192.168.0.100)

STEP 2:

Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1)

STEP 3:
Click on the "Admin Login" button near the top right side of the screen, then click on the "Line 1" tab.

sip3000-cnf1

STEP 4:
You need to modify only a few parameters from the factory default. They are listed here:

Proxy:

Server Name

Display Name:

Enter your full name, this will show up as part of your callerid.

User ID:

Enter the phone number given when you signed up for BrainTEL service.

Password:

Enter the provided password when you signed up for BrainTEL service.

Register Expires:

2000

Please click on Admin Login in top right corner of configuration page and then select Advance. And make sure that your settings are as follows:

In System:

spura-syst

In SIP:

spura-sip

In Line1:

spura-ln1

STEP 5:

Click on the "Submit All Changes" button at the bottom of the form.


STEP 6:

Make calls!

you are now ready to make and receive calls, your phone number is +92-42-210xxxx, it can be dialed from anywhere in the world, from ptcl Lahore line, you will have to dial only 210xxxx.

 

Subcategories